THE IC BOARD
We have made our own "quick" design with the main target of speed and small size. So, some wires and "air" solded components were made. Apparently, this has caused some confusion, as several e-mails received demonstrate. So we have changed this page, trying to make it more understandable. Anyway, don't hesitate to contact us to try to solve any problem you could find. (at mikel_b@aavbae.net or carmelo_f@aavbae.net)
First of all, you can see a general 2-sides view of the circuit. We'll later explain some mounting details. At the bottom of the page you can find the full-size 2 sides TIFF graphics (at 300 dpi) to print the actual board:
Figure #1: General view. Jumpers and wires in red, circuit side in cyan.
Note that in figure #1 only one of the four diode groups were
drawn, to simplify it.
The connections of the diodes placed at the zone marked with the
* is detailed at the following graphic:
Figure #2: Diode connections.
figure #3. Detailed view of the diode connections, showing the air wiring
The wires connected to the top part of the board are wired on the circuit side.
Here you can download the full sized components side and circuit side on TIFF format:
 |
|
|
|